Hi all,I'm new to actiontiles and I'm trying to get the control of my thermostat working. 

My panel shows the current temperature of the thermostat but doesn't give me the option to change the temperrature.

I have full control in smarthings but when I first setup actiontiles and I sync with smarthings and imported my devices it wasn't in the list  

Can someone advise what may be the problem?

Cheers, Kevin.

Hey all,

i have a samsung washing machine, that shows up in my ST app.
Ive been able to authorise it within AT (shows up as "washing machine" in the 2nd grouping list).

however when i go to add this as a "thing" - its not listed? What am i missing sorry

Any plan to integrate support for the WebCore Value Tiles to display the information they contain?

http://community.webcore.co/t/release-value-tiles-dth-for-displaying-webcore-variables-stats-in-a-thing/4725

When using the webcore presence sensor it is possible to set a "home" location and that works great with actiontiles for showing present/not present. I am wondering if it would be possible to enhance it further to have the location show at the bottom since you can set multiple geofences in webcore. So when i'm in my "home" location it would light up like normal, however when i leave, if i arrive at another geofence location it would not light up but at the bottom the text would read "work" or whatever the geofence name i have setup in webcore would be. I'll post an example picture below shortly. 

It would make my main panel look better and save same space as well.

I have battery powered Sirens outdoors and mains powered Sirens indoors.

I don't mind if the battery icon is visible in the footer for mains powered things, I already have it on some of my motion sensors.

Anyone integrated Sonoff or Tasmota Flashed devices? 

Specifically I am working on displaying pool and hot tub temp reading data from the Sonoff TH10 or TH16. 

I think I can get control to turn on and off Sonoff devices with Tasmota flash by pushing IFTTT Web urls but not usre how to get a read from the Sensors. I can get a device page to return txt version of Temp information. Not sure how to parse it out and display it with action tiles. Loving ActionTiles.. 

The thermostat device is missing a "resume" capability -- which tells the thermostat to stop holding the current temperature and resume its schedule. 

This is really a bug - as your up/down temperature controls perform a manual hold on the thermostat and the tile provides not way to resume the schedule....

So I mounted a monitor on one of the walls near my kitchen to use Action Tiles.

How cool would it be if we could write our own API calls with expected return values?

For instance, I know we can call out to "Media" and return maps, gifs, video, etc. How about calling out a a weather service (think openweathermap.org) using our own API keys, we could retrieve weather information for whatever timeframe we specify.

I was home alone watching a movie, I walked over to my kitchen and I knew I had put in a Pizzahut order, but it was taking so long. My first reaction was to look at that monitor, not sure why, but I know that if I had a tile where I could enter a webhook, I would totally use it for this and a bunch of other things...

Any thoughts?

I am not sure if this has been covered, but any help would be appreciated.

Now that Curb has been integrated into SmartThings, is there a way to add a tile that shows the energy consumption? There is a "Net Grid Impact" that shows your total energy use. It subtracts whatever solar you have and this is what your "grid impact" is. Of course, if you don't have solar, this is still the total you are using.

I have gone to "Authorize Things" but it does not come up.

Any ideas?

I don't want to add every circuit, although that might be cool as a separate panel, just the total.

Thanks!

Hi,

Are there ways to add Non smarthings like TP link smart plug, Yeelight etc to the tiles.?

When I press the tile to unlock my door it prompts with "Would you like to unlock "lock name"? Is there a way to turn this function off? I would like the door to simply unlock.

Is there an option for a generic thermostat tile? The tile is so robust, displaying the mode and allowing the mode to be changed,I have no need for specific heating and cooling tiles. I would like just a single 1x2 tile that has setpoint controls and is not heat or cooling specific. 

I have sensor for dust levels.

but actiontiles is not supported that.

When is the fine dust sensor supported?

Hi all!

Is it possible to add a tile to show actual values from the Smappee monitor? I can’t find a way to add the monitor to ActionTiles inside the SmartThings app.

Thx!!

Is there a way to access the Home/Away status on the Nest Thermostat through ActionTiles? I'm using the NST Manager in SmartThings and everything is working great. The number of available tiles is also very good. The one thing I'm not able to find is a way to change the status from Home to Away (and vice versa). A separate tile for this would be very helpful. I utilize home/away for setting ECO mode on/off. I've tried using Presence but have run into too many problems where all of a sudden I show as being away and my heat would go off. This wouldn't be a problem but I am in a cold climate and my normal heating is around 70 and my ECO heating is down around 45. The temps are currently in the teens. I've temporarily setup a virtual button and use Webcore to command it Present() or Away(). It works, but its not very clean as is not without its downsides keeping them in sync.

I just added a door lock to my setup.  I used the rboy : Universal Z-Wave Lock With Alarms device type and it gives me the ability to turn on and off the 60 second Auto-lock feature.  I would love to have this as a tile on my wall mounted tablet inside the door.  Auto-lock is a huge help for me as I often forgot to lock the door previously.  But I've found when running out to get the mail or bring in a load of groceries it can be a hassle. I realize I might not be typical use case but I was hoping either it would be relatively simple to add or their are more people out there that would like the same capability.

Does anyone know if you can add a tile to see the powerbot vacuum?  Perhaps just to see the status of it, but controlling it would be great too.  I just purchased one and it is now setup in the SmartThings application.  I can see it from the IDE page and from my phone's SmartThings app.  

I'm trying to get it on the action tiles page but unfortunately it isn't showing up as anything I can add.  Does anyone have any experience with this?  Is it even doable?  Thanks!

im Looking to purchase a Yamaha WX-010BL WiFi speaker. I was looking to see if I could connect to action tiles and play music and control speaker from a tile simple to I believe how a Sonos works. I wanted to go with Yamaha as I found it on amazon for $79 instead of $150 for comparison Sonos.  I’m currently using an older Bluetooth speaker that’s connected to tablet and have a YouTube link tile.  This opens a new page and music stops playing if I want to go back to my panel   I was looking for a way that would play within actionstiles.  Thank you for any and all suggestions 

EDIT by Moderator:

Per:  https://smartthings.developer.samsung.com/develop/api-ref/capabilities.html#Air-Quality-Sensor

    "name": "Air Quality Sensor",
    "status": "live",
    "attributes": {
        "airQuality": {
            "schema": {
                "type": "object",
                "additionalProperties": false,
                "properties": {
                    "value": {
                        "type": "integer",
                        "minimum": 0,
                        "maximum": 100
                    },
                    "unit": {
                        "type": "string",
                        "enum": [
                            "CAQI"
                        ],
                        "default": "CAQI"
                    }
                },