Gonna be adding a water pressure sensor to one of my Arduinos. Please consider adding a pressure tile.

Thanks.

Alexa has a skill for my alarm.com account.  Is there any way to integrate that with ActionTiles?

working on a digital bathroom the panel will be on the landing wall.

All lighting will be hue rgb colour.

Is there a tile that is compatible for changing the colour?

If I turn on a light via Amazon Echo or via another app (like Belkin's Wemo app), the switch tile on the panel is not updating to the "on" position. When you press the tile, it doesn't turn the light on at that point (because it's already on) it just make the tile indicate that it's on. Press the tile again and it will turn off as expected. Seems like it just doesn't know that the other app turned it on.

Also, same thing happens when turning a switch off via another device or app.

Are you planning to add Stringify or IFTTT support?

Does actionstiles work with Samsung Connect home?

I have an Ecobee3 connected to my SmartThings hub and have created two tiles. One tile for the dual thermostat and another for the remote sensor. When I use the tile to adjust the temperature the ecobee responds almost immediately, as seen through the ecobee app. However if I use the ecobee app to set the temperature back to its original setting the tile does not update unless I force an refresh through the SmartThings app.

1. Is there a tile thing to force the SmartThings refresh?
2. I cannot find a tile thing to view the main ecobee sensor. I have the remote sensor tile already added. How do I add the main sensor?

I have two CT-30 thermostats and they show up in Action Tiles just fine but I have no way of changing the mode or fan setting Heat/Cool/Off Fan On/Auto. I've seen on the Smart Tiles where people have switches put together but i think it would be ideal to have a drop down list or popup with options. I don't think a dedicated button would be necessary as it may lead to inadvertently changing the setting. Also, on the dual Thermostat tile, the mode shows idle when smartthing shows heating/cooling.

I am looking for a way to have a countdown or count-up timer displayed in ActionTiles that is direct correlation with a webCoRE Piston or any other App that can send out timer or schedule information.

I have many Pistons that are on Timers and instead of going in the App and then opening up whatever app that has the timer, I would like to mount a Table on the Wall with ActionTiles and easily have access to various timers.

Example 1. If back door has not been opened for 5 hours Then Nag the family:

webCoRE sets an internal timer counting up to 5 Hours

Action Tile Displays

Potty Time

5:35pm

Example 2. If dryer stays on for 1hr 30minutes then shut off and Nag the family

Action Tile Displays

Dryer

30 minutes and counting upward to 1:30

Example 3. If Kitchen Lights are on and Motion is inactive Then wait 3 minutes Turn Off

Action Tile Displays

Kitchen Lights

-1:15 and counting down

Hi there,

Looking for ideas. I have a gogogate controlling my gate and garagedoor. I use IFTT and some virtual switches in Smartthings to make them work together. Basically when the virtual switch is ON, IFTT will open the gate. IF Closed, IFTT will close. I can add the switch to actiontile but if someone closes the gate not using actiontile it does not go back to the previous state so next time I want to use it I have to press the button to turn the switch "off" before I can turn it "on" again to open the gate.

Any suggestion to improve this? 

Frank

Hello,

So I would really love to know how much a certain light or lights is costing me and have a question. 

would it be possible to add something like this:

User when adding a new tile say a light switch, enters the watts of the given light bulb or bulbs or whatever, then enters average cost of their electricity say .12 cents a kilowatt 

• User enters 1 time electricity cost of .12 cents a killowatt
• User adds a switch or whatever 
• Master bedroom (has 4 light bulbs each 10 watts ) so user enters 40 watts 
• now action tiles will calculate amount of cost and show daily weekly lifetime and so on cost of master bedroom lights 

This would be amazing since it would only have to be entered once by the user and user will constantly have a ballpark idea of their homes electric usage / cost . 

Honestly i would love love to know how much my kids leaving their lights on all the time is costing me lol , or even better how much my outside lights being on all night are costing me and say turning them off 30 minutes sooner or later would save me how much ? 

Sorry for long post 

Thank you ActionTiles team your product is amazing and i have the purchased license!

Hi all,

I'm very new to the ActionTiles App, like 10mins new!!

I have created my 1st Panel with several Tilesets so far.

I have a Tileset for Battery Monitoring for Sensors and another Tileset for Temperatures from Sensors.

I have noticed that when I setup the 2nd Temps Tileset it cascaded the information from the Battery Monitoring Tileset.

Is there a way to stop this as I want to monitor everything separately.  Yes I am OCD with these sorts of things ;).

If there is a way around this or to stop it, any help would be greatly welcomed.

Cheers

James

I'm not sure if this is a DTH or Tile type. I want a virtual tile (let's say switch) that controls multiple device (Easy with webCoRE), but if one of the devices that is controlled by that virtual switch changes state, I want the Action Tile to change state to On (without turning on the other devices controlled by simulated switch) thus allowing that device to turn off with simulated switch.

I hope I'm making sense

There is a bug that may be experienced especially by new users... 

After adding your Location (➕) or Authorizing Things to ActionTiles, you may find some of them are not listed in the Location View and the "Add Thing Tile to Panel" dialog box.

This likely only occurs for Things selected from lists "3)" and/or "4)" on the SmartThings Authorize Things page. If the Things are shown in lists "1)"  or "2)", you can workaround this bug by selecting them there instead.

https://actiontiles.userecho.com/uploaded/image/19647/10/14/84cab4345139e930ca5288b9d922a543.blob

I have two Bose Soundtouch 10 speakers under Things in SmartThings, yet they don't appear when attempting to Authorize Things in ActionTiles.

The default Device Handler that they are both using is LAN Bose Soundtouch. I went as far as modifying the two devices in IDE to use Device Handler "Bose Soundtouch" but this didn't change the results. All of my other Things appear under Authorize Things correctly.

These speakers are Works With SmartThings certified so I'm classifying this as a bug as per Terry's instructions.

Thanks,

WB

Any plans to support "Button" capability.  Have have a custom device handler that provides multiple buttons.  They work great thru the smartthings app.  Would like to add some buttons to my ActionTiles Panels.

Can I get my Neato on ActionTiles?

Terry from our conversation earlier and what SmartThings introduced with their Favorites on the Dashboard, versus the existing SmartThings Widget that add ALL SmartThings Routines to it. Maybe there is an opportunity here to recreate as you stated, a version of the existing Widget to be able to access and run all Routine that have been previously added to Action Tiles.

What I think would be even more powerful would be to create this Widget, if it's even possible, to allow modifying of the widget to add / remove specific devices and routines from it, versus how the ST widget contains ALL routines with only a Refresh functional element. Also how for the flexibility of sizing the widget as you see in my screenshots, length and width. The ST default is 2x2 but it allows it to be resized vertically and horizontally.

Here are some screenshots of my ST Widget on my home Page with all he routines. I moved my clock so I could expand the table even larger for you:

Thanks,

Mark