Does anybody know how to stop fully kiosk from closing every couple of hours?

I have in the past using Chrome on my Android phone added shortcuts to panels on my home screen. No problem.

Just created a new panel. I opened it in Chrome on my phone. Selected add to home screen. But the only thing it will add now is app.actiontiles.com. It won't add the panel address. And it also doesn't give me the option to rename it like it used to.

Anyone else seen this issue and know how to correct it?

Existing way of running the panels in Chrome (or other) browser doesn't seem to keep them in immersive mode (on Android). Any home screen shortcut created runs full screen, but not immersive on the phones and tablets I have tried. If we had a dedicated app that launches the page, it could be coded to always stay in immersive mode, rather than having to press the full screen button inside ActionTiles. It would also remain immersive after a link had been launched and returned from, such as to run Spotify. Such an app could also potentially have options to launch it immediately after unlocking the device, or set it up as a home screen app so that it can be a launcher to replace the home screen if the device was a dedicated ActionTiles device.

I apologize if this has already been covered.

I have a tile that opens a webpage, and I am using the Fully browser.

The problem I’m running in to is that once I’ve opened the webpage, I’m unable to navigate back to the AT home screen.

I’ve enabled the option to swipe to navigate, but that does not seem to work on my device (Fire 7). 

I’ve also enable the toolbar in Fully, but honestly the UI clashes with AT. Ideally, I’d only want the toolbar to show after I’ve tapped the URL tile; but I also realize that Fully sees all webviews the same, so it’s probably not possible.

Any ideas?

I'm sure this must have been raised before, but sorry I can't find it with the search engine in the threads...

I have been playing around with what's possible with the Remote Admin of Fully Browser, including the image capture from the on board camera, what I would like to do is use webcore to code to capture say 10 images on motion detection... doesn't even need to be the Fully browser motion detector, for example the device is in my kitchen so if the kitchen motion detector triggers and SHM is 'armed' then I would like to use the tablet camera to capture some images.

I think I can do all of it in webcore except when I issue the command 

/?cmd=getCamshot&password=[pass] 

to Fully browser - how do I capture that image ?? how can I redirect that image to a store somewhere ? anyone achieved this ?

Today I  installed ActionTiles on my Galaxy Tab S, Model Number: SM-T800, Android version: 6.0.1 and I loved how easily it loaded fully synchronized from my LG V20 which is running Android 7. I wanted to see how it reacted to an earlier version of Android. I rebooted my Samsung Tab S to make sure that the Icon was fine. NO, once again that little green horned Android Icon came up instead! Terry and Alex, your ActionTiles actually have a problem. I have over 10 Apps with Icons that were made up from 5 different programs installed on this Tablet that have no problems. I have 2 different Shield K1 Tablets that I use with my Drones thst I thought of trying but they are 

new with Android 7. If this is happening to me with different manufacturers and operating systems I'm sure you're just seeing the tip of the iceberg!

But, I love your ActionTiles!!! 

Jim Larsen 

I had the bright idea of controlling my led lights for the christmas tree with my phone, and i also see the youtube video show how to control christmas lights by phone. It's so cool and special. How can i got this? Need smart christmas lights?

I am getting a Ring Pro for Christmas.  I currently have several tablets around the house that run Fully and ActionTiles.  After reading posts, it looks like I can not integrate Ring and AT... but, can I set the tablets to automatically switch to the Ring App if there is an alert?  Thanks

Has anyone ever figured out a way to actually pull down the notification pane, when Fully was in Kiosk Mode?  I"m wondering if there is a setting that allows it, or something we can whitelist that will permit it.  I haven't had any success yet though.

So far, I can display my ActionTiles panel on the top half of my Nexus 9 Android tablet while viewing a Ring doorbell camera on the lower half of the screen. In addition, but not at the same time,  I can also run the Zmodo app and view one of my Zmodo cameras on the bottom half of the screen. I cannot use the MeShare app, which supports my Zmodo cameras, in the split screen mode. I realize that not all phones and tablets can do split screen. It is nice to control lights, alarms and sprinklers while you are viewing your front yard on a fairly big screen. 

Stays at top of my panel of my Android tablet.

I have had it happen a couple times now, but only on my Android (and my wife's). I'm looking at right now. The specific routine does not show up and the tile just has * and says routine. On the desktop it is actually saying the name of the routine and has the routine symbol. When this happened before it eventually changed to what it should be so I think it might be a refresh issue?

Edit - hitting Reload in the options does get them to show up right.