Blue Iris Feed not working on Fully Kiosk Browser
I have configured BI on a dedicated PC, and have setup a few camera feeds. I am able to view these feeds on Chrome and Safari browser.. but on my AT using Fully Kiosk I am not able to view it.
Here are my web sever settings.
Here's my action tiles feed
As you can see i can see the camera feed, but this is in chrome browser.. but it wont show up on fully kiosk. What am i doing wrong.
Answer
I'm not sure I understand the question.
Does the feed work within ActionTiles Panel(s) in Chrome on the same tablet that you are testing with Fully?
Do you have authentication disabled? (ActionTiles is not able to send user and password to Blue Iris).
- If Chrome works (in ActionTiles!) then next test the feed URL as the Start URLfor Fully.
- Next contact Fully support (if you have Licensed Fully). Do not mention ActionTiles or they will not assist you.
- Fully runs Android Webview (based on Chromium). You can also test using the WallPanel Android App as an alternative Webview client - at least worth experimenting.
I am using AT on a fire tab 10. Chrome isnt on it.
I have tested at on other pc's and the stream shows up just fine. I only have issues on fully kiosk.
Terry thanks for your response.
I am configuring action tiles from my pc, using chrome. Here when i view the action tiles from my PC, i can see the cam streams on my through action tiles. But when i load the same tiles in Fully Kiosk Browser those streams are not visible.
Is there some setting in Fully Kiosk Browser that i need to turn on or off to make this happen?
With regards to turning off the authentication on BI, this is what you want me to do?
I have done it, but still as i said, i can see the stream in AT through chrome browser.. but cannot see it through FKB
Open an INCOGNITO tab or window on your PC. If you are asked to login when you go to the camera URL then you have not successfully disabled authentication.
ActionTiles cannot be used with authentication unless you login in a separate Tab. Fully disables tabs and pop-ups by default.
Please - Explore all Fully settings to become familiar with it.
We are not Fully nor Blue Iris experts. We are ActionTiles experts.
Ok, so I have been able to figure out this issue.
I have Blue Iris installed in a Windows 10 based Virtual Machine in Vmware in my beefy home lab. The vm is on Admin Vlan, the FireTabs I have around the home are on a different IoT Vlan that does not have access to the Admin Vlan. hence I am not able to view the feeds on the firetabs. I have moved the Blue Iris VM to the IoT vlan in the VMware and now it shows up just fine.
Thanks!!
Customer support service by UserEcho
Ok, so I have been able to figure out this issue.
I have Blue Iris installed in a Windows 10 based Virtual Machine in Vmware in my beefy home lab. The vm is on Admin Vlan, the FireTabs I have around the home are on a different IoT Vlan that does not have access to the Admin Vlan. hence I am not able to view the feeds on the firetabs. I have moved the Blue Iris VM to the IoT vlan in the VMware and now it shows up just fine.
Thanks!!