![](https://cdn.userecho.com/characters/68.png?1)
Battery Tile Color Change
Is there a way to get a tile that shows battery level to change to a different color when the battery level is low?
Answer
![](/s/cache/55/f9/55f9f932cfcb1bfecb82198f26e43877.png)
Derek, when battery level is <= 25%, it's intent is set to Accent. When it's <= 5% the intent is set to Warn. The intents colors change according to Panel Theme.
![](https://cdn.userecho.com/characters/84.png?1)
Hi Alex,
When you say "Alarm" do you mean "Accent" - there doesn't seem to be an Intent called "Alarm" - so what I'm finding is that my flat batteries show as the same color as my motion sensors when active, which doesn't really make sense.
![](/s/cache/55/f9/55f9f932cfcb1bfecb82198f26e43877.png)
Yes, I meant to say Accent and Warn. I corrected the post above.
![](https://cdn.userecho.com/characters/84.png?1)
Ok.- so I have a theme where 'Accent' is green. This works great for door open/close, motion sensors, doors open etc. But For batteries I would want <25% to be some other color like yellow and then red for < 5%.
There doesn't seem to be any way around this because the Theme is set on the Panel, but if I could set an override theme on a specific TileSet, I could create a different theme for my batteries where Accent is yellow and it would be great. Do you think this is doable?
![](/s/cache/55/f9/55f9f932cfcb1bfecb82198f26e43877.png)
At the moment, it's not possible to override these intents for battery tiles.
There's a popular request to allow for Tiles Intents to be assigned based on numeric values of sensors, which also applies to batteries. I made a note of your comments here.
Customer support service by UserEcho
Derek, when battery level is <= 25%, it's intent is set to Accent. When it's <= 5% the intent is set to Warn. The intents colors change according to Panel Theme.