At the time of writing, ActionTiles is only compatible with Smart Home Monitor in SmartThings Classic mobile app.
SmartThings Home Monitor in the New Mobile App is not yet available for third party app integration. We will offer direct integration as soon as it becomes available.
Meanwhile, this easy workaround allows SmartThings Home Monitor to
integrate with ActionTiles.
Step 1) Create the following 3 Virtual Switches using any method of your choice. (f.e. How to create Virtual Switches using the IDE).
1.1) STHM Arm Away
1.2) STHM Arm Stay
1.3) STHM Disarmed
Step 2) Create 6 Automations using the New
SmartThings Mobile App.
Automations 2.1 - 2.3 bind the state of Virtual
Switches to SmartThings Home Monitor.
Automations 2.4 - 2.6 bind the state of SmartThings
Home Monitor to Virtual Switches.
You should now have the following 6 Automations:
Step 3) Authorize 3 Virtual Switches with
ActionTiles. Then, add 3 Tiles, they could look something like this:
3.1) Edit each of the Tiles to assign custom icons to match
SmartThings Mobile App using `home-alarm-away`, `home-security` and `home-alarm-off`
3.2) Other optional configurations:
- Change headers
- Hide footers
- Assign PIN Codes
The Tiles will look something like this:
Congratulations! You have successfully set up 3 Tiles that mirror SmartThings Home Monitor in the New Mobile App. This is only a temporary workaround until the official integration is available.
Customer support service by UserEcho